AIS: See and be seen.

Stentec offers several different AIS systems. When you fill out this questionnaire you will receive the recommended AIS system according to your answers.


Length of your ship

What is the length of your ship?


Length: 20 meters or more.

The length of your ship is 20 meters or more. According to the rules of the Dutch Rijkswaterstaat, you are required to use AIS type A. We do not sell these types of AIS.


Wireless communication via WiFi

You can connect the AIS as standard with a USB cable to your laptop or on-board PC and with a serial connection to your plotter.

It is also possible to opt for an AIS device with WiFi module. This allows you to wirelessly connect the transponder to the laptop, on-board PC, tablet or smartphone. You do not need an internet connection for this.

Do you want to be able to connect your AIS transponder, in addition to a USB and serial connection, via a WiFi connection?



GPS Antenna

An AIS transponder always needs its own GPS antenna. All our AIS transponders have an internal GPS antenna. The advantage of this internal GPS receiver is that you do not always have to install a separate GPS antenna and draw cables. Do you have a steel ship? Then an external GPS antenna will have to be connected and placed outside because the signal cannot reach the AIS transponder.

Is the internal GPS antenna sufficient or do you also need an external GPS receiver?



TV Receiver

A TV/radio receiver can be added to a AIS device. The signal is received through the VHF antenna. Connect your onboard radio or TV to the AIS device and listen or watch to your favorite stations Please mind: this option requires a good antenna installation.

Do you want to connect TV or radio to your AIS?




Below you will find the AIS that is the best suited based on your answers. If you have any further questions, please contact our helpdesk via 0515-443515, helpdesk@stentec.com or use our contactform.


€ 1.308,-

EasyTRX3-S-IS-IGPS-N2K-WIFI-IDVBT

The EasyTRX3 is the newest generation AIS transponder with excellent performance and functions. With 5 Watts of power and higher transmission speed, the EasyTRX3 will increase your safety on board.

The product name above indicates which options are built in:

  • IS: the device has a built-in splitter to connect your VHF antenna
  • IGPS: the device has an internal GPS antenna
  • N2K: the NMEA 2000 output which can be connected directly to the N2K network (backbone)
  • WIFI: you can connect the transponder wirelessly to your computer, telephone or tablet via Wifi
  • IDVBT: integrated DVBT antenna splitter. The transponder has a TV and FM radio connection..


€ 28,-

VHF cable

Our AIS transponders have an internal splitter. You connect the radio antenna to the AIS, after which you can connect the radio to the AIS with this cable.




€ 28,-

Connection cable EasyAIS / EasyDVB to FM radio

Connect your radio or TV to your AIS transponder via this cable.




€ 105,-

CPA3 external alarm for EasyTRX3

Connect this device to your EasyAIS transponder and you wil be able to turn on the 'silend mode' (your position will no longer be transmitted) or send a PANPAN (in need of help, not SOS) message with the flick of a switch. This system will also send out an alarm for potential collisions.





Below you will find the AIS that is the best suited based on your answers. If you have any further questions, please contact our helpdesk via 0515-443515, helpdesk@stentec.com or use our contactform.


€ 1.308,-

EasyTRX3-S-IS-IGPS-N2K-WIFI-IDVBT

The EasyTRX3 is the newest generation AIS transponder with excellent performance and functions. With 5 Watts of power and higher transmission speed, the EasyTRX3 will increase your safety on board.

The product name above indicates which options are built in:

  • IS: the device has a built-in splitter to connect your VHF antenna
  • IGPS: the device has an internal GPS antenna
  • N2K: the NMEA 2000 output which can be connected directly to the N2K network (backbone)
  • WIFI: you can connect the transponder wirelessly to your computer, telephone or tablet via Wifi
  • IDVBT: integrated DVBT antenna splitter. The transponder has a TV and FM radio connection..

You filled in that you need an external GPS antenna. You can order this antenna separately. Below you will find more information about the external GPS antenna:


€ 103,-

GPS Antenna for EasyTRX3

Every AIS transponder must always have its own GPS antenna. Unfortunately, the GPS antenna already installed on board cannot be used for this. Our AIS transponders are all equipped with an internal GPS antenna, but when the device is placed out of reach of the satellites (such as in a steel ship) you need this external GPS antenna.

If for whatever reason the GPS reception of the internal GPS antenna does not work, an external GPS antenna can still be connected afterwards. The internal GPS antenna of the EasyTRX3 will be switched off by connecting the external GPS antenna.




€ 28,-

VHF cable

Our AIS transponders have an internal splitter. You connect the radio antenna to the AIS, after which you can connect the radio to the AIS with this cable.




€ 28,-

Connection cable EasyAIS / EasyDVB to FM radio

Connect your radio or TV to your AIS transponder via this cable.




€ 105,-

CPA3 external alarm for EasyTRX3

Connect this device to your EasyAIS transponder and you wil be able to turn on the 'silend mode' (your position will no longer be transmitted) or send a PANPAN (in need of help, not SOS) message with the flick of a switch. This system will also send out an alarm for potential collisions.





Below you will find the AIS that is the best suited based on your answers. If you have any further questions, please contact our helpdesk via 0515-443515, helpdesk@stentec.com or use our contactform.


€ 1.135,-

EasyTRX3-S-IS-IGPS-N2K-IDVBT

The EasyTRX3 is the newest generation AIS transponder with excellent performance and functions. With 5 Watts of power and higher transmission speed, the EasyTRX3 will increase your safety on board.

The product name above indicates which options are built in:

  • IS: the device has a built-in splitter to connect your VHF antenna
  • IGPS: the device has an internal GPS antenna
  • N2K: the NMEA 2000 output which can be connected directly to the N2K network (backbone)
  • WIFI: you can connect the transponder wirelessly to your computer, telephone or tablet via Wifi
  • IDVBT: integrated DVBT antenna splitter. The transponder has a TV and FM radio connection..


€ 28,-

VHF cable

Our AIS transponders have an internal splitter. You connect the radio antenna to the AIS, after which you can connect the radio to the AIS with this cable.




€ 28,-

Connection cable EasyAIS / EasyDVB to FM radio

Connect your radio or TV to your AIS transponder via this cable.




€ 105,-

CPA3 external alarm for EasyTRX3

Connect this device to your EasyAIS transponder and you wil be able to turn on the 'silend mode' (your position will no longer be transmitted) or send a PANPAN (in need of help, not SOS) message with the flick of a switch. This system will also send out an alarm for potential collisions.





Below you will find the AIS that is the best suited based on your answers. If you have any further questions, please contact our helpdesk via 0515-443515, helpdesk@stentec.com or use our contactform.


€ 1.135,-

EasyTRX3-S-IS-IGPS-N2K-IDVBT

The EasyTRX3 is the newest generation AIS transponder with excellent performance and functions. With 5 Watts of power and higher transmission speed, the EasyTRX3 will increase your safety on board.

The product name above indicates which options are built in:

  • IS: the device has a built-in splitter to connect your VHF antenna
  • IGPS: the device has an internal GPS antenna
  • N2K: the NMEA 2000 output which can be connected directly to the N2K network (backbone)
  • WIFI: you can connect the transponder wirelessly to your computer, telephone or tablet via Wifi
  • IDVBT: integrated DVBT antenna splitter. The transponder has a TV and FM radio connection..

You filled in that you need an external GPS antenna. You can order this antenna separately. Below you will find more information about the external GPS antenna:


€ 103,-

GPS Antenna for EasyTRX3

Every AIS transponder must always have its own GPS antenna. Unfortunately, the GPS antenna already installed on board cannot be used for this. Our AIS transponders are all equipped with an internal GPS antenna, but when the device is placed out of reach of the satellites (such as in a steel ship) you need this external GPS antenna.

If for whatever reason the GPS reception of the internal GPS antenna does not work, an external GPS antenna can still be connected afterwards. The internal GPS antenna of the EasyTRX3 will be switched off by connecting the external GPS antenna.




€ 28,-

VHF cable

Our AIS transponders have an internal splitter. You connect the radio antenna to the AIS, after which you can connect the radio to the AIS with this cable.




€ 28,-

Connection cable EasyAIS / EasyDVB to FM radio

Connect your radio or TV to your AIS transponder via this cable.




€ 105,-

CPA3 external alarm for EasyTRX3

Connect this device to your EasyAIS transponder and you wil be able to turn on the 'silend mode' (your position will no longer be transmitted) or send a PANPAN (in need of help, not SOS) message with the flick of a switch. This system will also send out an alarm for potential collisions.





Below you will find the AIS that is the best suited based on your answers. If you have any further questions, please contact our helpdesk via 0515-443515, helpdesk@stentec.com or use our contactform.


€ 962,-

EasyTRX3-S-IS-IGPS-N2K

The EasyTRX3 is the newest generation AIS transponder with excellent performance and functions. With 5 Watts of power and higher transmission speed, the EasyTRX3 will increase your safety on board.

The product name above indicates which options are built in:

  • IS: the device has a built-in splitter to connect your VHF antenna
  • IGPS: the device has an internal GPS antenna
  • N2K: the NMEA 2000 output which can be connected directly to the N2K network (backbone)
  • WIFI: you can connect the transponder wirelessly to your computer, telephone or tablet via Wifi
  • IDVBT: integrated DVBT antenna splitter. The transponder has a TV and FM radio connection..


€ 28,-

VHF cable

Our AIS transponders have an internal splitter. You connect the radio antenna to the AIS, after which you can connect the radio to the AIS with this cable.




€ 28,-

Connection cable EasyAIS / EasyDVB to FM radio

Connect your radio or TV to your AIS transponder via this cable.




€ 105,-

CPA3 external alarm for EasyTRX3

Connect this device to your EasyAIS transponder and you wil be able to turn on the 'silend mode' (your position will no longer be transmitted) or send a PANPAN (in need of help, not SOS) message with the flick of a switch. This system will also send out an alarm for potential collisions.





Below you will find the AIS that is the best suited based on your answers. If you have any further questions, please contact our helpdesk via 0515-443515, helpdesk@stentec.com or use our contactform.


€ 962,-

EasyTRX3-S-IS-IGPS-N2K

The EasyTRX3 is the newest generation AIS transponder with excellent performance and functions. With 5 Watts of power and higher transmission speed, the EasyTRX3 will increase your safety on board.

The product name above indicates which options are built in:

  • IS: the device has a built-in splitter to connect your VHF antenna
  • IGPS: the device has an internal GPS antenna
  • N2K: the NMEA 2000 output which can be connected directly to the N2K network (backbone)
  • WIFI: you can connect the transponder wirelessly to your computer, telephone or tablet via Wifi
  • IDVBT: integrated DVBT antenna splitter. The transponder has a TV and FM radio connection..

You filled in that you need an external GPS antenna. You can order this antenna separately. Below you will find more information about the external GPS antenna:


€ 103,-

GPS Antenna for EasyTRX3

Every AIS transponder must always have its own GPS antenna. Unfortunately, the GPS antenna already installed on board cannot be used for this. Our AIS transponders are all equipped with an internal GPS antenna, but when the device is placed out of reach of the satellites (such as in a steel ship) you need this external GPS antenna.

If for whatever reason the GPS reception of the internal GPS antenna does not work, an external GPS antenna can still be connected afterwards. The internal GPS antenna of the EasyTRX3 will be switched off by connecting the external GPS antenna.




€ 28,-

VHF cable

Our AIS transponders have an internal splitter. You connect the radio antenna to the AIS, after which you can connect the radio to the AIS with this cable.




€ 28,-

Connection cable EasyAIS / EasyDVB to FM radio

Connect your radio or TV to your AIS transponder via this cable.




€ 105,-

CPA3 external alarm for EasyTRX3

Connect this device to your EasyAIS transponder and you wil be able to turn on the 'silend mode' (your position will no longer be transmitted) or send a PANPAN (in need of help, not SOS) message with the flick of a switch. This system will also send out an alarm for potential collisions.





Below you will find the AIS that is the best suited based on your answers. If you have any further questions, please contact our helpdesk via 0515-443515, helpdesk@stentec.com or use our contactform.


€ 1.156,-

EasyTRX3-S-IS-IGPS-N2K-WIFI

The EasyTRX3 is the newest generation AIS transponder with excellent performance and functions. With 5 Watts of power and higher transmission speed, the EasyTRX3 will increase your safety on board.

The product name above indicates which options are built in:

  • IS: the device has a built-in splitter to connect your VHF antenna
  • IGPS: the device has an internal GPS antenna
  • N2K: the NMEA 2000 output which can be connected directly to the N2K network (backbone)
  • WIFI: you can connect the transponder wirelessly to your computer, telephone or tablet via Wifi
  • IDVBT: integrated DVBT antenna splitter. The transponder has a TV and FM radio connection..


€ 28,-

VHF cable

Our AIS transponders have an internal splitter. You connect the radio antenna to the AIS, after which you can connect the radio to the AIS with this cable.




€ 28,-

Connection cable EasyAIS / EasyDVB to FM radio

Connect your radio or TV to your AIS transponder via this cable.




€ 105,-

CPA3 external alarm for EasyTRX3

Connect this device to your EasyAIS transponder and you wil be able to turn on the 'silend mode' (your position will no longer be transmitted) or send a PANPAN (in need of help, not SOS) message with the flick of a switch. This system will also send out an alarm for potential collisions.





Below you will find the AIS that is the best suited based on your answers. If you have any further questions, please contact our helpdesk via 0515-443515, helpdesk@stentec.com or use our contactform.


€ 1.156,-

EasyTRX3-S-IS-IGPS-N2K-WIFI

The EasyTRX3 is the newest generation AIS transponder with excellent performance and functions. With 5 Watts of power and higher transmission speed, the EasyTRX3 will increase your safety on board.

The product name above indicates which options are built in:

  • IS: the device has a built-in splitter to connect your VHF antenna
  • IGPS: the device has an internal GPS antenna
  • N2K: the NMEA 2000 output which can be connected directly to the N2K network (backbone)
  • WIFI: you can connect the transponder wirelessly to your computer, telephone or tablet via Wifi
  • IDVBT: integrated DVBT antenna splitter. The transponder has a TV and FM radio connection..

You filled in that you need an external GPS antenna. You can order this antenna separately. Below you will find more information about the external GPS antenna:


€ 103,-

GPS Antenna for EasyTRX3

Every AIS transponder must always have its own GPS antenna. Unfortunately, the GPS antenna already installed on board cannot be used for this. Our AIS transponders are all equipped with an internal GPS antenna, but when the device is placed out of reach of the satellites (such as in a steel ship) you need this external GPS antenna.

If for whatever reason the GPS reception of the internal GPS antenna does not work, an external GPS antenna can still be connected afterwards. The internal GPS antenna of the EasyTRX3 will be switched off by connecting the external GPS antenna.




€ 28,-

VHF Cable

Our AIS transponders have an internal splitter. You connect the radio antenna to the AIS, after which you can connect the radio to the AIS with this cable.




€ 28,-

Cable EasyAIS/EasyDVB to FM radio

Connect your radio or TV to your AIS transponder through this cable.




€ 105,-

CPA3 external alarm for EasyTRX3

Connect this device to your EasyAIS transponder and you wil be able to turn on the 'silend mode' (your position will no longer be transmitted) or send a PANPAN (in need of help, not SOS) message with the flick of a switch. This system will also send out an alarm for potential collisions.




Can we assist you?

We like to get in touch with you and give you personal advice or a free quotation.