With WinGPS you can create a full navigational centre. The software is designed to customize as you please. Will you use a tablet or laptop? Will you need to be able to read your screen outside or will you be using WinGPS inside? And, when installing additional hardware, will you do this wireless or are you required to use wires?

GPS receiver

When determining your position, speed and course you will need to use a GPS receiver. Most people will choose an affordable USB GPS Receiver but you could also choose a bluetooth or onboard receiver. Onboard GPS receivers are usually attached using a USB-to-serial cable.

USB to Serial cable

Many on-board equipment, such as AIS and GPS, still have a serial connection. However, most PCs and laptops no longer have this serial connection. With the help of this USB to Serial cable you can still connect your on-board equipment to your laptop or board PC. Also suitable for Windows 10.

Extra screen

Connect your laptop or onboard PC with an extra monitor for outside use. View and control WinGPS with a sunlight resistant touchscreen.


Connect all of your board equipment to one device: the multiplexer. All data will be redirected from the multiplexer into WinGPS in one flow. The multiplexer can be connected using a serial or USB port, or wireless via bluetooth or wifi. Ideal when using a tablet or smartphone with WinGPS Marine.


In our online webshop you can find a lot more hardware than stated above, for example compasses, weather stations, fishfinders, etc. To view our entire collection use the direct link via the button below.