A A A
Home / News / WinGPS Nieuws

WinGPS 5 Nieuws

WinGPS 5 news December 2011

Attention: open in a new window. PDFPrintE-mail

New developments and user experience
Stentec Software, December 2011


Why this newsletter?
With this newsletter we would like to inform you about the coming 2012 editions of WinGPS 5.
During our open door day on December 17th a test version of Voyager was demonstrated.


WaterwayNetworkEditor in action 
With the new network editor the so called design of the water way network is improved significantly and expanded with the Belgian water ways and a big part of Germany. Currently the bridges and locks are added to Belgian network.
An exporter is written which enables to convert the network to the WinGPS 5 planning network.

The European network is now divided in:
NL Inland, IJsselmeer/Markermeer, Waddenzee (NL, DE, and DK), North sea, Belgium, Luxembourg, Germany, France, Denmark, Sweden and East sea and Great Britain.
WinGPS 5 2012 allows these areas to be activated separately. 

WinGPS 5 Voyager 2012 test version 
An important mile-stone is the release of the WinGPS 5 Voyager test version. This version also contains all the Pro and Navigator options. For the first time an up to date, good visible network was realized for both yachting as well as commercial shipping.
The network on the IJsselmeer/Markermeer is expanded with many yachting tracks. Furthermore the channels and buy lines are corrected. The German wadden area is added.   

In 2012 the following areas will be further constructed: North East Sea channel, Ems-Jade Channel, Belgian water ways, Cruising Area Rijn-Moezel-Saar-Neckar. Furthermore North west Germany to Lübeck - Maagdenburg with Ems, Weser, Elbe en Mittelland channel.

The extensive network is ideal for route planning. For example: to the East sea via Brunsbüttel and Kiel.


Planned routes on your map
With route management you can visualize routes on the map. The route is shown in straight lines connected with way points. This will work just fine for open leg routes. A route on the inland water ways always consists of a point of departure and your destination. The detailed planned route over the network will be replaced by a dotted line which indicates the precise route shape. This shape depends on departure time and other data. Only when the route is started or adjusted it will be drawn over the network again. Possibly in another shape due to a changed departure time. New in the 2012 edition is the shape of the last planned route will be saved, so it always can be shown completely and not in dotted lines anymore. Many users find it very important the shape of the route is recognizable. The planned route can be adjusted in the edit mode.




INLAND ECDIS charts for WinGPS
Stentec has developed a procedure to create DKW2 chart sets from Inland ECDIS charts. This allows the sailing area to be extended with the most important European rivers and channels. During the production process a choice is made concerning scale and color depths to create an
optimal north faced chart visibility. Clicking objects and adjust other settings is not possible like in the ECDIS charts. On the other hand, the chart set is optimized for yachting and doesn’t need to be adjusted to it. WinGPS provides a sharp, rotated chart image when
sailing along the river HeadUp.  To be able to read rotating place names it is possible to open an extra chart window with a north faced chart. The ECDIS DKW2 charts are very compact. Think of at most 20MB for the Rhine. Below a 1:25000 map of the Rhine in test CourseUp mode.

DKW German Rhine, Moezel, Saar and Neckar
For the DKW2 Chart sets of the Rhine is chosen 1:20.000. For the tributaries this is 1:10000. The quality is better than of the frequently used Rhine atlas. It is no longer necessary to go to the next page every 8 km. The chart will follow. The route network on the Rhine and tributaries on the DKW ENC chart is accurately shown in the middle of the channel. When following the route you can sail along the mostoptimal route using the XTE bar.

 


Openseamap chart sets(DKW OSM)
Openseamap is a community of yachtsmen who develop duty free navigation maps. With DKW Builder also DKW2 charts for WinGPS can be build of Openseamap charts. Stentec has developed several OSM chart sets of a.o. the German rivers.OSM charts contain less detailed water way information compared to DKW ENC charts, but more information of the surrounding area. Besides ENC charts also smaller charts for yachting are available. Below an OSM chart and on the right the ENC while sailing along the Rhine and Ems to Kiel in simulation mode.



Water way network of great value for navigator
The WinGPS 5 water way network is developed with help from experienced skippers. Not only for the inland waterways, but also The Wadden and a journey to the East sea. The route network can therefore be seen as a valuable interpretation of the map. Important for safety and ideal to prepare your journey. As with the BaZ updates we cannot guarantee 100% correctness and with that safety. The network is to be used as a navigation tool. You are always able to deviate from the network and plan your own (open leg) routes.  

More visibility with Sun flare resistant AIS
The strong increase of AIS among commercial shipping and yachting leads to increased safety. AIS combined with WinGPS enables you to see a ship going down a river from afar. It will also see you if you have an AIS transponder. 

 

The new Pro and Voyager version have settings to avoid bad visibility on the map due to busy AIS traffic. Names of stationary AIS ships can be switched off. Yachting (Class B) and stationary ships can be permanently excluded. When zooming out, the names become smaller until they disappear. The SOG can now be shown on the map and the course of AIS ships can be switched off. The standard setting will give a clear chart visibility, also in case of passing by harbors and anchorages. Built in routines help ignore damaged AIS messages due to sun flares.



Last NLTides database for WinGPS 4
For the last time a new NLTides database will be available for WinGPS 4 Pro and Voyager. A set-up with the astronomical tides can be downloaded from our download section on our website. The new NLTides database is integrated in WinGPS 5 Pro and Voyager 2012. A good reason to buy an upgrade to WinGPS 5. 

Online quotations! 
Our new online service gives you the possibility to request a quote or personal advice. We will provide you with an offer containing the best navigation solution.
    
Think of a new laptop on board provided with WinGPS and all digital charts for your holiday in 2012. From an energy-efficient 10” laptop to a robust 15, 4” or 17” laptop. A ready to use package which can be delivered at home or you can pick up in our shop in Heeg. The quotations will be available in English as soon as possible.
www.stentec.com/nl/contact/offerte-aanvragen


Cruising, motor boating or regatta sailing
When switching from a cruising sailing boat to a motor boat or racing boat, you can adjust WinGPS very easily under the following settings: File/Properties/Ship. When you choose for motor boat, all options for sailing will be excluded. This way the menu will appear as the WinGPS 5 Pro menu. Without polar diagram, but with the convenient route optimalization. The Magic button can be used to minimize fuel consumption or the quickest
crossover. Under ship settings you can also choose the regatta sailing mode. This enables you to sail without using your engine, also in case of little wind. 

What is a sailing boat’s polar diagram?
Many Voyager navigators only see the polar diagram when they select their type of sailing boat. When the gribfiles are updated, Voyager calculates how long it will take to navigate your boat along the planned route. In case of low speed, motor operation can be can be switched on. The polar is used to determine the optimal route, departure and arrival time.When you sail faster or slower than planned, you can reduce or enlarge your polar diagram with the button at the bottom left. The wind speed of a standard polar is defined at 10m height above the water surface. You can correct a deviating Grib-windspeed using factor level in GRIB manager. 

 


In case of comparison with your wind meter, take into account that the wind speed in the mast head due to wind shear can be 20% higher than at 10m high. This factor is of importance when you use your wind velocity meter input to keep your ship up to speed using your polar diagram. In case of a polar diagram like below the WOW (wind over water) comes from above. The arrow shows the speed of the ship compared to the wind. In this case almost on the wind over starboard. The wind course CRS and the blue polar diagram are both controlled by the wind velocity meter. The blue bar on the right shows the ship speed is faster than the polar diagram. The red bar on the left shows the VMG (head to wind speed) is lower than it should be.


WinGPS 5 Voyager contains polar diagrams for over more than1400 different boat types. a.oBaltic, Bavaria, Beneteau, Breehorn, Contest, Dehler, Dufour, Elan, Etap, F&F, Feeling, First, Friendship, Gib’Sea, Grand Soleil, Halberg Rassy, Hanse, Hunter, J22-92, Jeanneau, Kolibri, Koopmans, Maxi, Nicholson,  Oceanis, Optima, Solana, Sigma, Spirit, Standfort, Sunfast, Sun Odyssey, Swan, Sweden, Trintella, v.d. Stadt, Victoire, Waarschip, Winner, X-yacht.
Find your sailing boat type on our polar list at download/documentation on our website.

Workshops & lectures WinGPS 5
This fall the WinGPS workshops and Lectures in Heeg and Loosdrecht where well attended. End March and April 2012 new workshops will be planned. Ideal preparation for the sailing season. For more information and to sign up please consult our agenda. A crew member can come along for free.January 10th and March 13th there will be a WinGPS Voyager introduction night and a WinGPS 5 Pro workshop in Huizen. Only for NvvT members. On April 10th a lecture about laptop navigation with WinGPS 5 and AIS is planned. It will take place at WSV Giesbeek.

 


New hardware in 2012
The Globalsat BU353 s4 will be the successor of the popular and reliable BU353 GPS Mouse. The new generation high sensitive sirf 4 chip combined with EGNOS ensures the best position accuracy, also under lesser conditions like poor reception in a steel cabin or under a bridge.

Spotted on the Dutch market. A 27” LED monitor from Samsung with an impressive 2560*1440 pixels. A non-reflective screen with high brightness. Because of its size it seems the perfect replacement for charts on board 

The screen can be tilted 90 degrees and mounted on a ship wall. Which WinGPS user will be the first to test it on board?

Additional measurements for the Vaarkaart Fryslân
In collaboration with the Province Stentec is developing digital charts of Friesland with a unique depth image. Source material is the depth measurements carried out in 2009 as part of the Frisian Lakes Project. On the advice of Stentec additional measurements have been done to be able to create complete and up-to-date chart of the Frisian Lakes. Due to delay of delivery of the TOP25 charts, the release on Boot Holland 2012 is not definitive yet. Stentec will improve the depths annually.

www.wingps.de  and Boot Düsseldorf
The German WinGPS website of our agent Matthias Jürgens from Jürgens Yacht Service went online this month. The Stentec products range in the online shop is aimed at German users. Together with Stentec Matthias Jürgens will be present at Boot Düsseldorf at the Stentec stand 11E3. The WinGPS 5 2012 version will be demonstrated.


Expected WinGPS 5 2012 updates
WinGPS 5 Navigator:
- Improvement and expansion of route network
- Sail along network route with XTE bar and CTS
- Energy-efficient NMEA monitor.
- More stable iPad connection.
- Network routes always shown completely.

WinGPS 5 Pro (in addition to Navigator):
- Acceleration optimal route with NLTides.
- Tide database 2012.
- Optimized visibility in case of busy AIS traffic
- Tide coupling for network route points.

WinGPS 5 Voyager (in addition to Pro):
- Easy adjustable for tour sailing, motor boat or    regatta sailing.
- High resolution HIRLAM files in 2012.

- WinGPS 5 Lite for 2012 charts




Please send your questions and comments to:  This e-mail address is being protected from spambots. You need JavaScript enabled to view it or call 0515-443515

 

WinGPS 5 Nieuws Oktober 2011

There is no translation available


Nieuwe ontwikkelingen en gebruikerservaring
Stentec Software, 27 oktober 2011 
Aan deze nieuwsbrief kunnen geen rechten worden ontleend.

Waarom deze nieuwsbrief ?

Met deze nieuwsbrief willen wij u informeren over de lopende ontwikkelingen van onze nieuwe WinGPS 5-serie. 
Tevens tips voor gebruik en de gemelde ervaring van de eerste WinGPS 5 gebruikers.Dit zijn er  totaal al meer dan 1000. Of iedereen gevaren heeft met het slechte weer is de vraag. Uw reactie met gebruikservaring en suggesties wordt in ieder geval zeer op prijs gesteld. 




Verbetering vaarwegen netwerk NL

Het routenetwerk van WinGPS 5 is gebaseerd op het netwerk van de VIN database van Rijkswater-staat. Geschikt voor planning maar op sommige vaarwateren niet voor navigatie. Denk aan de veranderlijke vaargeulen op de Waddenzee, de omleiding bij Warrega en de gewijzigde betonning op het IJsselmeer.
In ontwikkeling is een editor waarmee Stentec de vorm en de eigenschappen van het VIN-netwerk kan verbeteren voor WinGPS 5.




Buitenlandse vaarwegen in zicht

Met de editor kan ook het routenetwerk worden uitgebreid naar Duitsland, België en Frankrijk.
Voor de Duitse vaarwegen komt dit jaar nog een DKW-kaartenset beschikbaar als ondergrond van het netwerk. De Rijn en andere Duitse rivieren zijn dan beschikbaar voor de plezier- en de binnenvaart met WinGPS 5 aan boord.

Energiezuinig met nieuwe NMEA-monitor

De NMEA-monitor wordt gebruikt om de inkomende NMEA berichten van de instrumenten te kunnen bekijken. In WinGPS 4 en 5 staat deze datastroom standaard aan. Op sommige PC’s kan dit echter tot hoge of zelfs overbelasting van de aangeroepen Windows routines leiden. Door aanvinken van NMEA weergave onderbreken kan onnodig energieverlies of zelfs vastlopen worden voorkomen.
Voor een update is een nieuwe NMEA monitor ontwikkeld, welke geen gebruik meer maakt van de Windows routines. WinGPS 5 is hiermee stabieler en zuiniger geworden !

Vooraankondiging Vaarkaart Fryslân 2012

Stentec ontwikkelt i.s.m. Provincie Fryslân een unieke digitale waterkaart voor WinGPS 5. 
Onder het golfoppervlak  wordt met de Vaarkaart Fryslân het dieptebeeld van het Friese Meren project zichtbaar gemaakt. Vastlopen buiten de vaargeul kan worden voorkomen zodat  interessante havens en Marrekritte aanlegplaatsen kunnen worden aangedaan. Het dieptebeeld is gebaseerd op recente metingen in het kader van het Friese Meren Project. De meest recente TOP25 ondergrondkaart toont havens en andere omgevingsinformatie. Geschikt voor alle WinGPS 5-serie programma’s. De release is gepland voor Boot Holland 2012. CD €24,90, download €22,50.

Route langs varen wordt verbeterd. 

De eerste gebruikers melden twee belangrijke zaken bij het langs varen van een route.
1 . De aankomsttijd ETA van een open route en die  naar het 1e routepunt van een netwerkroute worden vaak overschat. WinGPS gaat uit van de kruissnelheid en maakt niet goed gebruik van de SOG. Dit wordt verbeterd voor een update.
2 . Bij de netwerkroute wordt bewust niet de te sturen koers (CTS) getoond, omdat het vaak niet verantwoord is om de punten van het VIN netwerk langs te sturen. Als op de geplande netwerkroute routepunten worden geklikt is de CTS echter wel beschikbaar. Handig bij mist op de Waddenzee bijv..
Voor het langs varen van een netwerkroute is echter een betere oplossing bedacht. Na genoemde verbetering van het netwerk ligt de routelijn praktisch midden in de vaarweg. Een in breedte instelbaar XTE balkje, zonder rode alarmzone, toont in meters hoeveel het schip van de ideale routelijn afligt. Door rechts te houden voorkom je aanvaringen. Om te sturen wordt een CTS getoond, welke de richting van de netwerkroute aangeeft en niet de koers naar het volgende punt, zoals bij open routes.    

WinGPS 5 op uw iPad in de kuip

Uw navigatielaptop of pc binnen is draadloos te bedienen met een iPad of Andoid tablet in de kuip. Met Connectify (www.connectify.me)  maakt u van uw Window laptop een WIFI hotspot. De lite is gratis maar de Pro versie is aanbevolen voor een automatische verbinding. Connectify werkt helaas niet met Windows 7 starter maar wel met XP, Vista, Win7 Home, Premium en Ultimate. Installeer vervolgens iDisplay op de laptop (gratis) en op uw tablet. Voilá. WinGPS is vanuit de kuip te bedienen. 
Ideaal als 2e monitor. Een waterdichte hoes beschermt uw iPad tegen regen en buiswater. Een kaart of polair diagram kunt u ook bekijken op uw iPhone of Galaxy S2. Bekijk ook de Youtube video van WinGPS op een iPad.


Wantij oversteken met 5 Pro en Voyager

Op onze site staat een artikel over Wadzeilen met WinGPS 5 Voyager, met video’s over het plannen van een wantijoversteek. Dit werk als volgt: 
Vervang op het wantij de netwerkroute door een (3 punts) open route. Het middelste wantijroutepunt koppel je aan een getijstation. De wantijdiepte haal je uit de dieptestaat van Rijkswaterstaat. De achterlooptijd staat in de gratis Quicktide van Wim Blankenstijn evenals de NAP naar LAT dieptecorrectie. Zelfs het tijdslot van 3 wantijpunten op een route is zo te bepalen. Wantij routeren is snel geleerd na een keertje oefenen. Bekijk de video’s !

Hoe werkt de Magic Button in Voyager?

Selecteer nieuwe route. In de routemenubalk windt u de blauwe Magic button waarmee u de krachtige routeoptimalisatie optie aan kunt zetten.
 
Zet routeoptimalisatie uit, voor u een route uitzet op open water. Zorg dat de Grib files van wind en stroming bijgewerkt zijn.
Zet een route uit met zo min mogelijk punten. Een oversteek kan uit 2 punten bestaan. Met de magic button wordt de routeoptimalisatie aangezet en WinGPS 5 Voyager tekent voor u een optimale route. Afhankelijk van de instellingen kan dit de snelste of zuinigste route zijn. 
Er wordt slim rekening gehouden met wind en stroming (kies grib of NLTides). Motorgebruik bij weinig wind invloed hebben op de routevorm. Let op:  De optimale route is een geadviseerde route !  Aangegeven wordt bijv. over welke boeg u uw slagen het beste kunt maken. Het advies kunt u overnemen door routepunten op de optimale route te klikken. Een beetje verschuiven is soms aanbevolen om niet te scherp te varen. 

High Resolution Gribfiles voor 5 Voyager

Na het installeren van een komende Voyager update kunt u bij Gribbeheer ook kiezen voor 8*8km HIRLAM. Deze gribfile wordt om de 8 uur ververst en voorspelt 48u wind. Rijskwaterstaat gebruikt deze voor dijkbewaking-modellen. Een nauwkeurigere windvoorspelling voor Nederland en omliggende landen is daarom niet beschikbaar. Ideaal dus voor zeilers met WinGPS 5 Voyager. De kwaliteit van de routeplanning hangt immers vooral af van de windvoorspelling. De Magic Button routeoptimalisatie komt daarmee ook op het IJsselmeer en Wadden goed tot zijn recht. 

Verwachte WinGPS 5 -updates 

WinGPS 5 Navigator: 
  • Verbetering vaarwegennetwerk
  • Verbetering route langs varen.
  • Energiezuinige NMEA monitor.
  • Stabielere iPad koppeling.

WinGPS 5 Pro (aanvullend op Navigator): 
  • Versnelling optimale route met NLTides. 
  • Getijde database 2012.

WinGPS 5 Voyager (aanvullend op Pro, waarschijnlijk 2012):
  • Schip-status: motoren, zeilen of wedstrijdzeilen. - Hoge resolutie HIRLAM Grib files.

WinGPS 5 Lite voor de 2012 kaarten

Reacties



 

Login


Find us on:
find Stentec on Twitter find Stentec on Facebook find Stentec on Facebook